ISO 9001 is the international standard for quality management systems. Certification is not a one-off exercise. It depends on a cycle of audits that test whether your system works in practice, not just on paper.
For a UK manufacturer, three types of audit matter: internal audits you run yourself, supplier audits you carry out on others, and certification audits carried out by an external body. Each has a different purpose and a different way of going wrong.
What is an ISO 9001 audit?
An audit is a systematic, documented and independent check of evidence against a set of criteria. In this case the criteria are the requirements of ISO 9001, plus your own procedures, customer requirements and any applicable legal obligations.
Auditors do not simply read your manual. They sample records, watch work being done and talk to the people doing it. The aim is to confirm that what you say you do is what you actually do, and that it delivers the results you intend.
Internal audits: your own early warning system
ISO 9001 requires you to carry out internal audits at planned intervals. The standard does not set a fixed frequency. It expects you to plan a programme that reflects the importance of each process, changes in the business and the results of previous audits.
Internal auditors must be objective and impartial. In practice that means people should not audit their own work. In a small firm, you may need to share auditing with a colleague from another department or bring in outside help.
A useful internal audit follows a process from end to end, for example from customer order to despatch, rather than ticking through clauses one by one. This tends to expose gaps between departments, which is where many quality problems begin.
Supplier audits: managing what you buy in
ISO 9001 requires you to control externally provided processes, products and services. Supplier audits are one way to do this, alongside approved supplier lists, performance monitoring and incoming inspection.
The depth of the audit should match the risk. A supplier of safety-critical machined components warrants a closer look than one providing general stationery. Many customers, particularly in aerospace, automotive and medical sectors, will also expect you to pass their requirements down your supply chain.
Having a supplier hold ISO 9001 certification can give some comfort, but it does not guarantee that the specific product you buy meets your specification. Check the scope of their certificate and which sites it covers.
Certification audits: what the external body does
Certification is carried out by a certification body, which should be accredited by
UKAS or an equivalent national accreditation body. Check this before you appoint one, as it affects how widely your certificate is recognised.
The usual cycle runs over several years. An initial certification audit, normally in two stages, is followed by surveillance audits in the intervening years and a recertification audit at the end of the cycle. Confirm current surveillance frequency and any remote audit allowances with your chosen certification body.
Stage one typically reviews your documentation and readiness. Stage two tests implementation on site, across the processes within your certified scope.
What do auditors look for?
Auditors look for objective evidence. They are interested in whether the system is established, implemented and effective. Common areas of focus include:
- Leadership: whether senior management is visibly involved, with a quality policy and objectives that are understood and measured.
- Risk-based thinking: how you identify and act on risks and opportunities in your processes.
- Document and record control: current versions at the point of use, and records that are complete and retrievable.
- Competence: evidence that people are trained or otherwise qualified for the work they do.
- Calibration and measurement: equipment that is identified, calibrated and traceable.
- Nonconformity and corrective action: whether root causes are investigated and fixes are checked for effectiveness.
- Customer feedback and complaints: how you collect it and what you do with it.
- Management review and internal audit: that both happen, with inputs and outputs that lead to action.
How to prepare for ISO 9001 audits
Preparation is mostly about running your system properly all year, not a rush before the visit. Even so, some practical steps help.
- Confirm your scope and make sure it accurately describes what the site does.
- Complete a full cycle of internal audits and a management review before the external audit, and close out actions.
- Review previous audit findings and check that corrective actions worked.
- Brief staff so they can explain their role, the quality policy and how their work affects quality. They should answer honestly and only what is asked.
- Check that records, calibration status and training files are up to date.
- Agree who will host the auditor, who will provide documents and how the audit schedule fits around production.
Handling findings
Findings are normally graded, often as major or minor nonconformities, with observations or opportunities for improvement as lesser categories. A major nonconformity can delay or threaten certification until it is resolved.
Treat findings as information. Contain the problem, find the root cause, put in a fix and check later that it has held. Auditors are generally more reassured by a credible response than by a spotless report.
How often do ISO 9001 audits take place?
Certification typically runs on a three-year cycle, with surveillance audits in between and a recertification audit at the end. Internal audits follow a programme you set, based on risk and the importance of each process.
Who can carry out an internal ISO 9001 audit?
Any competent person who is objective and impartial and does not audit their own work. This can be a trained employee from another area or an external consultant.
What is the difference between a major and a minor nonconformity?
A major nonconformity usually means a requirement is not met in a way that affects the system's ability to deliver intended results, or there is a total breakdown of a process. A minor one is an isolated lapse. Certification bodies set their own definitions, so check yours.
Do I have to audit suppliers if they are ISO 9001 certified?
The standard requires you to control external providers according to risk. Certification can inform that decision, but you may still need to verify the scope, assess performance and audit where the risk is high.