Skip to content
Manufacturing Today

What are the ISO standards? A guide for UK manufacturers

What are the ISO standards? A guide for UK manufacturers

Image: Pixabay

Customers, auditors and insurers ask about ISO standards so often that the term can feel like shorthand for "properly run". In practice it means something more specific, and knowing the detail helps you decide which standards are worth your time and money.

What are the ISO standards?

ISO is the International Organization for Standardization, a non-governmental body based in Geneva. It publishes international standards: agreed documents that set out requirements, specifications or good practice for products, processes, systems and testing methods.
There are many thousands of them, covering everything from screw threads and paper sizes to quality management and information security. Most are technical and sector-specific. A handful are general management system standards that apply to almost any organisation.
The standards are voluntary. No one is legally required to follow ISO 9001, for example. They become obligatory only when a law, a regulator or a customer contract points to them.

Who writes ISO standards?

ISO standards are written by technical committees made up of experts nominated by national standards bodies. Those experts usually come from industry, research organisations, regulators, consumer groups and testing bodies.
Drafts circulate for comment and are voted on by member countries before publication. Standards are reviewed periodically and revised or withdrawn as technology and practice change. Always check that you are working to the current edition.
The consensus approach is deliberate. A standard carries weight because the people who will use it helped shape it.

The role of BSI in the UK

BSI, the British Standards Institution, is the UK's national standards body. It represents UK interests in ISO and in the European standards bodies, and it coordinates UK experts who contribute to international drafting work.
When the UK adopts an ISO standard, BSI publishes it as a British Standard, usually with the prefix BS EN ISO or BS ISO. The content is the same as the international text, but the designation shows it has been adopted nationally.
BSI also sells standards and offers training and certification services. It is worth knowing that standards writing and certification are separate activities. The body that writes a standard does not have to be the one that audits you against it.

Certification, accreditation and compliance

Three terms are often confused:
  • Compliance means you work to a standard, whether or not anyone has checked.
  • Certification means an independent certification body has audited you and confirmed that your system meets the standard.
  • Accreditation is the formal recognition, in the UK given by UKAS, that a certification, testing or inspection body is competent to do its work.
When choosing a certification body, check that it is accredited by UKAS or an equivalent national accreditation body. A certificate from an unaccredited provider may not be accepted by your customers.

The ISO standards manufacturers meet most often

  • ISO 9001: quality management systems. The most widely used standard and often a baseline requirement in supplier approval.
  • ISO 14001: environmental management systems. Useful for managing waste, energy and regulatory obligations, and increasingly requested in supply chain questionnaires.
  • ISO 45001: occupational health and safety management systems. It supports, but does not replace, your legal duties under health and safety law enforced by the HSE.
  • ISO 50001: energy management systems, relevant to energy-intensive sites looking to cut consumption and cost.
  • ISO/IEC 27001: information security management. Increasingly relevant as customers share designs and data with suppliers.
  • ISO 13485: quality management for medical devices.
  • IATF 16949: the automotive quality standard, which builds on ISO 9001 but is published by the International Automotive Task Force rather than ISO.
  • AS9100: the aerospace quality standard, also built on ISO 9001 and published by the aerospace sector rather than ISO.
The last two are not ISO standards in the strict sense, but they are often discussed alongside them and your customers may require them.

How to decide which standards you need

Start with your customers and your sector. Review contracts, tender documents and supplier approval requirements to see what is asked for, and what is likely to be asked for next.
Then consider the business case beyond the certificate. A management system standard works best when it helps you reduce scrap, rework, accidents or energy use. If it becomes a paperwork exercise, you pay for it twice: once in audit fees and again in lost time.
Practical next steps:
  1. List the standards named in your current contracts and tenders.
  2. Run a gap analysis against the standard to see how far your existing processes already go.
  3. Assign an internal owner with the authority to change processes.
  4. Obtain quotes from UKAS-accredited certification bodies and compare scope, audit days and surveillance requirements.
  5. Plan for ongoing costs: certificates are normally subject to periodic surveillance audits and renewal.
Trade bodies such as Make UK and the regional manufacturing advice services can often point you towards guidance and support. Check what is currently available before you commit budget.
What are the ISO standards in simple terms?

They are internationally agreed documents that set out requirements or good practice for products, processes and management systems. They are voluntary unless a law or contract requires them.

Is ISO 9001 a legal requirement in the UK?

No. It is a voluntary standard. It becomes a requirement only if a customer or contract demands it.

What is the difference between ISO and BSI?

ISO is the international body that publishes international standards. BSI is the UK national standards body, which contributes to ISO and publishes adopted standards as British Standards.

Does ISO certify companies?

No. ISO writes the standards but does not itself certify organisations. Independent certification bodies carry out audits, and the best-regarded are accredited by UKAS.

Related stories