Skip to content
Manufacturing Today

ISO 45001 for factories: what it requires and how it sits alongside HSE law

ISO 45001 for factories: what it requires and how it sits alongside HSE law

Image: Pixabay

ISO 45001 is the international standard for occupational health and safety (OH&S) management systems. For a UK factory, it offers a structured way to control risk, involve the workforce and show customers that safety is managed deliberately rather than by habit.
It is also widely misunderstood. Certification is voluntary, it is not a legal defence, and it does not mean a site complies with the law. This guide explains what the standard asks for and how it fits with the duties enforced by the Health and Safety Executive (HSE) and local authorities.

What is ISO 45001?

ISO 45001 sets out requirements for an OH&S management system. It was published by the International Organization for Standardization and is adopted in the UK by BSI as BS ISO 45001. It replaced the earlier OHSAS 18001 specification.
The standard describes a management system, not a list of technical safety rules. It does not tell you how guarding on a press brake should be designed. It asks whether you have a reliable process to identify hazards, decide controls, check they work and improve them.
It follows the same high-level structure as ISO 9001 and ISO 14001, so sites that already run those systems can often integrate it into existing documents, audits and management reviews.

What does ISO 45001 require?

The requirements are grouped into clauses that follow a plan, do, check, act cycle. In practice, a factory needs to show the following.
  • Context: understand the organisation, the needs of workers and other interested parties, and define the scope of the system.
  • Leadership: top management takes visible accountability, sets an OH&S policy and assigns roles and authority.
  • Worker participation: workers, including non-managerial staff, are consulted and take part in decisions on hazards, incidents and controls.
  • Planning: hazards are identified, risks and opportunities assessed, legal and other requirements recorded, and objectives set.
  • Support: competence, training, awareness, communication and controlled documented information.
  • Operation: operational controls, management of change, procurement, contractors and emergency preparedness.
  • Performance evaluation: monitoring, internal audit, compliance evaluation and management review.
  • Improvement: investigating incidents, handling nonconformities and corrective action, and continual improvement.
Two themes stand out for manufacturers. The first is the hierarchy of control: elimination and substitution should be considered before relying on procedures or personal protective equipment. The second is contractors and shared sites, which the standard expects you to manage rather than ignore.

How does ISO 45001 sit alongside HSE law?

UK health and safety law is set by statute. The Health and Safety at Work etc. Act 1974 places general duties on employers, and regulations add specific requirements on matters such as risk assessment, work equipment, manual handling, hazardous substances, noise and reporting of injuries. The HSE and local authorities enforce them.
ISO 45001 sits on top of that. It requires you to identify the legal requirements that apply and to evaluate your compliance with them. It does not list those laws or lower the bar. A site can be certified and still be in breach, and a site can comply with the law without certification.
HSE guidance, including its widely used HSG65 framework on managing for health and safety, follows a similar logic to the standard. Many managers find the two compatible. Certification bodies, however, assess against ISO 45001, not against HSE enforcement standards.

Does certification help with enforcement?

It can show that you have a systematic approach, and records from audits and reviews may be useful evidence of effort. It is not a defence, and inspectors will judge the actual conditions on site and whether risks are controlled so far as is reasonably practicable.

Is ISO 45001 certification worth it for a factory?

The commercial case usually rests on customers and tenders. Some larger buyers, public sector bodies and principal contractors ask suppliers for certification or equivalent evidence of management. If that is a recurring question in your bids, certification may pay for itself.
Other benefits are internal. A clear system can improve incident reporting, reduce repeat problems and give managers a routine for reviewing risk. Those gains depend on how seriously the system is used, not on the certificate.
The costs are real: management time, training, audit fees and ongoing surveillance. A small firm with low-risk operations may prefer to follow HSE guidance and a lighter system, and to consider schemes that assess competence, such as those used in contractor pre-qualification. Confirm which schemes are currently recognised with the relevant scheme operators or your clients before committing.

How to approach implementation

  1. Run a gap analysis against the standard and your current practice, including legal compliance.
  2. Secure leadership commitment and name who is accountable at director level.
  3. Involve the shop floor early, through safety representatives and operators who know the real hazards.
  4. Build on what exists, such as risk assessments, permits and training records, rather than writing new paperwork for its own sake.
  5. Audit internally before inviting an external body.
  6. Choose a UKAS-accredited certification body, as UKAS is the UK's national accreditation body for such organisations.
Allow time for the system to operate and generate records before the external audit. Auditors will look for evidence that the process works in practice, not just a manual.

Common pitfalls

The most frequent failure is treating the standard as a documentation exercise. Thick manuals with little connection to daily work will not control risk and tend to fail at the first sensible question from an auditor or an inspector.
Others include weak worker consultation, poor control of contractors, and legal registers that are not kept up to date. Each is avoidable with clear ownership and regular review.
Is ISO 45001 a legal requirement in the UK?

No. It is a voluntary standard. Legal duties come from health and safety legislation, enforced by the HSE and local authorities, and apply whether or not you are certified.

What is the difference between ISO 45001 and OHSAS 18001?

OHSAS 18001 was an earlier specification for OH&S management systems. ISO 45001 replaced it and uses the common high-level structure shared with other ISO management standards, with greater emphasis on leadership and worker participation.

Does ISO 45001 certification mean we comply with HSE regulations?

No. Certification shows that a management system meets the standard. It does not confirm legal compliance, which depends on the conditions and practices on your site.

Related stories